Three Facts About Pool Filter Sand

Your pool filter is the most important component of your pool. By keeping your water clean, your pool filter allows you to enjoy a fresh, relaxing dip whenever you want. There are several factors that contribute to the quality of the water filtration system of your pool, and today, we’re going to talk about one of the most important — sand. In this post, we’re going to shine a light on the role sand plays in keeping your water clean, as well as the differences between sand filters and the alternative options. Then, we’ll provide you with information on how to keep your pool filter sand clean, as well as where to get it.

Pool Filter Sand – Keeping Your Pool Clean

Pool filter sand is integral for your filter. Basically, the sand is what removes the dirt and debris from your pool’s water. Dirty water enters through your filter’s inlet pipe and is transported to the water distribution head where it makes contact with the sand. At this point, the pool filter sand helps weed out dirt and then the water is filtered back into your pool.

Their are alternatives to sand filters, such as Cartridge and D.E. Filters, but sand filters are widely regarded as needing the lowest amount of maintenance, sometimes going more than five years before you’ll need to open up your tank. These filters are also the most affordable, which is ideal if you’re trying to stick to a budget.

Keeping Your Pool Filter Sand Clean

While you may not need to replace your pool filter sand for years at a time, it is important that you keep it in the best condition to filter your pool’s water. You can do this by backwashing your filter. Backwashing is done by reversing the flow of water through your pool’s filter and sending it out through a hose connected to your pump. This process will ensure your pool filter sand doesn’t calcify, as well as remove the filtered waste.

Most experts suggest you backwash your pool once a week. That said, you should also consider an additional backwash if you’re pool has had a little more use than usual, or if you’re cleaning up after some rough weather.

Replacing Pool Filter Sand

Pool filter sand typically lasts for five years or more, but eventually it will need to be replaced. When the time comes, Aqua-Tech has you completely covered. When you stop into our showroom, you’ll find high quality pool filter sand, as well as everything else you will need to keep your pool in the best shape possible.

For more information on your filtering options, how to keep your pool filter and pool filter sand clean, and more, contact Aqua-Tech or stop in and see us today!

News

Related Articles

ZetaMix for Pools: What It Is, How It Works, and Why Pool Owners Love the Results

ZetaMix for Pools is a powerful water-clarifying solution designed to help Winnipeg pool owners achieve sparkling, low-maintenance water. Installed directly into your pool’s plumbing, ZetaMix uses high-speed mixing and nano-bubble technology to remove fine particles that cause dull water and high chlorine demand. Ideal for Winnipeg pools, ZetaMix improves filtration, reduces chemical use, and delivers clearer, better-feeling pool water all season long.

Read More »

Welcome Spring Back with a Little Extra Hot Tub TLC in Winnipeg

Spring in Winnipeg is the ideal time to give your hot tub a fresh start. An early-season service call ensures your spa is clean, balanced, and running efficiently after a long Manitoba winter. From removing winter buildup to checking equipment, replacing filters, and professionally balancing your water, a spring tune-up helps prevent costly repairs and gets your hot tub ready for relaxing evenings outdoors. Book your Winnipeg hot tub service early with Aqua-Tech to enjoy peace of mind, crystal-clear water, and a stress-free start to the season.

Read More »