TO CLEAN PUMP BASKET
1. Turn heater off and wait 20 minutes
2. Turn pump off
3. Remove pump lid
4. Clean basket and replace
5. Replace pump lid
6. Open filter air relief
7. Start pump
8. Close air relief after there is a stream of water
TO VACUUM POOL
1. Attach vacuum handle and head to hose and place in pool
2. Attach vacuum plate to hose
3. Fill hose with water by placing over return
4. Place vacuum plate over basket
TO INSTALL KREEPY OR POOL SHARK
1. Place Kreepy or Pool Shark into pool
2. Fill hose with water as above
3. Remove skimmer basket, place hose into the hole furthest from pool
