We have a Delta UV system

Asked by Rae

3 replies

Last Reply on October 10th, 2022 by Nigel

September 11, 2018

Recently changed bulb and quartz tube – was working fine – now neither of the lights on the ballast are on and system not working

Replies

  1. Nigel

    September 11, 2018

    Reply

    Hi Rae. First make sure you have proper power to where you are plugging in the UV ballast. Plug in another device that you know works at that same outlet. If this checks out you could try and bypass your psi switch under the Delta UV bonnet. If that checks out ok you could have a bad ballast. I’ve attached a purchase link to a ballast for your convenience. They are in stock and would ship today if purchased before pm 3: https://aqua-tech.ca/store/index.php/pool-parts/uv-parts/delta-uv-sanitizer-ballast-part-number-70-10420.html

  2. Dennis Engelman

    October 09, 2022

    Reply

    I have a Delta UV ultraviolet solution system for my pond/ had a crack in sleeve that made it keep shorting out. Replaced sleeve & new bulb/ still did not come on / received a new ballast transformer/ hooked up & still get a fault notice / so what could be wrong??

    • Nigel

      October 10, 2022

      Reply

      Dirty filter, bad pressure switch or poor wire connections perhaps Dennis.

Ask a Question or Comment