Replacing Accusage Seat jet housing

Asked by James Ellison

1 reply

Last Reply on October 6th, 2016 by Nigel

October 6, 2016

I have a cracked housing on a Accusage seat jet housing and would like to know how to properly remove the old housing.

Do I have to remove the oscillating nozzle first. If I do how do I and do I require any special tools.

Replies

  1. Nigel

    October 06, 2016

    Reply

    James, the Fluidix ST jets are threaded from the back. If you have a broken jet face you will need to access the jet from the rear for replacement. If you pop off the jet face, the nozzle simply pulls out. No special tools other then needle nose pliers for the nozzle. Depending how old the spa is and how soiled the jets and piping are they might be extremely tight with oils and dirt on the o-rings of the nozzle.

Ask a Question or Comment