As we’re heading into the cold, I want to make sure the menu settings are correct for our Hamilton Spa. These are the settings, please let me know if they should be different: PF – 2Am (it goes off a few times a day, is that okay) SF – Heavy Mode Heat – Auto FC… Read More»
Good Afternoon, what setting should my (McKinley) Hot tub be set on for winter. We just purchased the tub this summer and wanted to make sure we had the tub set properly for winter use. Thanks Geoff
our 2001 Sundance Cameo has developed a leak in a couple of places – one being under the top rail at one of the air control valves. It appears it’s just a PVC glue joint that has failed which is easy enough but I cannot get the valve out. Trying to see if it unscrews… Read More»
How long for hot tub to connect to cell towers? I’ve installed app. Scanned code. Tub is still not communicating after 1.5hrs
How do I drain my hot tub?
We used the pool vacuum that was plugged into the skinner. After use we unplugged from the skimmer. One of the jets kept bubbling air into the water for a while and then stopped. Checked this morning and no bubbling coming out of jet. Is this just Back Pressure from the connecting and disconnecting of… Read More»
I have a few questions about my recently obtained pre-owned Krevco SSPA-1 Sunrise HOT TUB. About 17 years old, with limited use. 1. Should the circulation pump be running all of the time? 2. Currently there are always air bubbles in the water being circulated. Is this normal? Or does this indicate an air/plumbing leak?… Read More»
we just picked up a new 2018 Sundance 880 Optima last week and the first time we used it the temperature started at 105 but dropped to 100 and would not come up any higher – any ideas on how we can maintain a set temp of 104? thanks!
What are your recommended speed/duration settings for Speeds 1, 2 and 3 of a SuperMax VS pump. I have an 18×36 pool with a chlorinator. Also, do I need to re-program the pump each year or will it remember the settings while it’s powered off during the winter? Thanks.
How do I over ride the temperature Setting so that I can get 105 or 106F?