Hot Tub Insulation

Hot Tub is 15 years old. Wanting to do some insulation maintenance. What type of spray foam insulation should I use to seal up openings and worn out foam?

Broken lid

My Hamilton 780 hot tub lid has been getting heavier until it finally broke.I was able to get It out and confirmed that it had cracked and broke and now was wondering what to do next? can I replace just the one panel or do I need to replace the whole lid? Thanks in advance

Breaker tripping

What is causing the breaker to trip off on my Altamar hot tub? Does the message “bib” have anything to do with the problem.

Object in pipes

The nylon cover that covers the drain at the bottom where the filter is got sucked into the pipe. How can I retrieve it out of the pipe.

Hot Tub use in winter

Good Afternoon, what setting should my (McKinley) Hot tub be set on for winter. We just purchased the tub this summer and wanted to make sure we had the tub set properly for winter use. Thanks Geoff

Filter nut won’t loosen

I can’t seem to loosen the filter nut to clean the filter. I cleaned the filter once without issue. I must have tightened it a bit too far and now it won’t budge. I don’t want to force it and damage something. Can you please help me with this issue? While waiting for your help… Read More»

Sundance Hot tub

My Ozonator light is always on, is this an indication there is a problem? Is there someway of finding out what it could be?

Pool draining

Dawn has an indoor spa and was wondering if she should just drain it for the summer time as it gets really hot in the room where the spa is. She was also wanting additional information on any products that she may need to purchase to do so.

Bad Board

I have a 2010 QCA GT-289 hot tub. Pump 1 runs almost continually, and pump 2 does not turn on, though I can hear the relay click when I press the button for it. I’ve plugged pump 2 into pump 1’s spot and it does work. The 20 Amp fuse was blown and I replaced… Read More»