Congratulations on your new hot tub! Here are 3 educational how-to videos. Please watch them in order and email us at watertesting@aqua-tech.ca once your new spa and hot tub education is complete 🙂 #1: Weekly care of your new hot tub #2: How to read your water test results print out #3: Top 10… Read More»
I have 20 YEAR OLD COAST PARADISE SPA 220 W TWO PUMPS,,THE SPA PACK DIED AND I BIT ON THE REBUILD GUYS,,,THAT LASTED A MONTH AND FRIED,,I DETERMINED TO KEEP TUB AND I BOUGHT A NEW S CLASS HOOKED IT UP AND HAD A PUMP ONE START ISSUE WHICH I MAY OF HAD BEFORE WHEN… Read More»
I have a error code low flow switch error. I emptied the tub and refilled it. So the code is still there. Check for air locks etc from everything I read. Also it is not heating up at all.. Also where you put the filter there is a cover that goes up and down in… Read More»
Spa lights, both exterior and interior not turning on
Hot Tub is 15 years old. Wanting to do some insulation maintenance. What type of spray foam insulation should I use to seal up openings and worn out foam?
My Hamilton 780 hot tub lid has been getting heavier until it finally broke.I was able to get It out and confirmed that it had cracked and broke and now was wondering what to do next? can I replace just the one panel or do I need to replace the whole lid? Thanks in advance
We broke the jet housing trying to remove the jet. Can you price out the replacement parts And labor for this? Please and thanks
I need to replace a jet in my Sundance caprio. It’s a 90’s model. Don’t have the model number. I was going to take the jet out and come down to the store but I can’t get it out. Is there a trick to removing the jet?
5 year old peyton hot tub loosing an inch of water every few days. Located small drip area under one back corner.seems to be wrapped in insuLatin blanket so csnt get at jets. Any tips on locating leak?ie.dye. Can tub be tipped on side to repair if necessary.
Hi, I bought a used 2013 Sundance Edison and most of the jets are broken and fell out. I bought it that way and was wondering if thats the reason why there is barely any pressure on some jets and more pressure on others. Will I get more pressure on the jets when i get… Read More»
