Click here for a step by step video on how to open and rinse your System 3 Filter:     Disassembly / Assembly Procedure Before disassembling the filter:: 1) Stop pump 2) Open air release valve 3) Close skimmer valves 4) Wait until all pressure is released from the filter tank and system before loosening… Read More»

I did a burn out treatment for a chlorine demand in my pool which turned it white and now my filters seem to be having a hard time clearing up the pool again as there has been no improvement in 2 days. When I opened the filter egg cartridge the tops of the filters were… Read More»

I am getting bubbles out of the jets and the pump reservoir will not fill completely When I open the valve at the top of the filter bursts of air come out This stops the bubbles at the jets but the pump still does not completely fill

This was submitted on Monday. Told it was lost in the mix. Told to resubmit: “Hi Dave Light Your comment in the Support section was received. Thank you for posting the following question. FILTER PSI READINGS Pool installed last spring 2018. Aqua Tech cleaned water with their filters. Our brand new filters then installed. Initial… Read More»

I already submitted a portal email on Monday to Support and told to resubmit again. “

It seems like my Hayward sand filter works normally, except when I’m cleaning it. When I Backwash it for a couple minutes, it’s ok. Then I rinse it for a minute and it’s ok. Then when I move it back to filter, it spews a little sand out the jet. Looks like I’ve lost a… Read More»

Can you please call me 204-637-3180 My sand filter seems to need backwashing far more often than is recommended. Thanks

the top of my filter is off but i can’t scoop our the sand – what do i do?

System 3:Modular Media Cleaning Procedure The modular media filter is designed for: 1) Low maintenance 2) Fine particle filtration 3) Cost savings   For best results, follow the steps below. Based on normal operation the filter element must be chemically cleaned once a year. To clean: a) Turn the pump off. b) Remove lid, and… Read More»

The sand in your pool filter should be chemically cleaned at least once a year to ensure proper pool operation. For best results, follow the steps below. a) Backwash filter for 3—5 minutes, rinse for 20 –30 seconds to remove the debris that can be rinsed off. b) Turn pump off and return dial valve… Read More»